Strong SRT 8222 - 9.0 TECHNICAL SPECIFICATIONS; Demodulator, Transmission, and Video Specifications; Audio, Tuner, and Memory Specifications; Connectors and General Data

21
9.0 TECHNICAL SPECIFICATIONS
Demodulator:
Demodulator: COFDM; 16 QAM/64 QAM; QPSK; 128/256QAM
Transmission mode: 2 K - 8 K
Video Decoder:
Prole level: HEVC (H265)
AVC/H.264HP@L4.1, MPEG-4 ASP supported
Video resolution: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Decoding: PAL/NTSC
Aspect ratio: 4:3 Letterbox, 4:3 Pan & Scan, 16:9 Widescreen, Auto
Audio Decoder:
Audio support: Dolby Digital Plus*/AC3+/PCM
MPEG MusiCam Layer II
Sampling rate: 32, 44.1, 48 KHz
Audio mode: Stereo, Multi-Audio
*Dolby Digital Plus, Dolby Audio and the double-D symbol are registered trademarks of Dolby Laboratories.
Tuner:
Front End: DVB-T/T2, UHF & VHF Tuner
Input frequency range: 174 – 230 MHz (VHF) and 470 - 790 MHz (UHF)
Input signal level: -20 ~ -82 dBm
Antenna power: 5 V DC, max. 50 mA, short cut protected
Memory and System:
Flash memory: 8 MB
SDRAM: Internal(1G bit DDR3)
Connectors:
RF IN - IEC Female
TO TV
S/PDIF (coaxial output)
HDMI
RJ 45 Ethernet
TV SCART (CVBS, Audio L&R)
USB 2.0 port: 5 V/500 mA (max.) supported
General Data:
Supply voltage: 220 - 240 V AC (SMPS), 50/60 Hz
Power consumption: 5 W (typ.), 10 W (max)
Power consumption in standby: <1 W
Operating temperature: 0 ~ +40° C
Storage temperature: -25 ~ +60° C
Operating humidity range: 10 ~ 85%, RH, Non-condensing