13
AFTERMARKET PRODUCT BIN - PLACEMENT
Aftermarket Product Bin - Placement
• Model B4732 (Shown Below) May Not Reflect
Every Feature Or Option Of Your Particular Case.
• Product bin is for placing bagged product such
as potato chips, pretzels, crackers, etc.
• Product bin is made of stainless steel.
• Remove product bin (to clean or replace).
1. Upper product bin is to hang on acrylic shield at
front of case.
2. Lower product bin prongs are to be inserted into
upper bin’s cutouts (in base) and hang securely.
3. View of assembled upper and lower product bins.
4. View of assembled upper and lower product bins
after being attached to case’s acrylic shield at front
of case.
1
2
3
4
To Next Page
Loading...
