Struers LaboForce-50 - Finalizing Adjustments and Operation; Completing the Adjustment; Noise and Vibration Levels; Operating the Device

Wet Grinding Disc
1. Moves the specimen mover head to the right.
2. Place the specimen mover plate in a position 2
– 3 mm from the metal ring.
A Metal ring
B Specimen mover plate
5.4.4 Complete the adjustment
1. Tighten the 2 fastening screws firmly. The specimen mover will now remain in position.
2. Cover the holes with the two caps.
Allen key and cover caps are included in the package.
5.5 Noise and vibration levels
For information about noise and vibration levels, see the specific machine manual.
6 Operate the device
For instructions on how to operate the device, see the specific machine manual.
See also the section "Intended use" for the specific machine manual.
6.1 Control panel functions
CAUTION
Keep clear of rotating parts during operation.
CAUTION
When working at machines with rotating parts, take care to prevent clothes and/or
hair from being caught by the rotating parts.
14 LaboForce-50
6 Operate the device