Note
Do not use acetone, benzol or similar solvents.
If the machine is not to be used for a longer period of time
• Clean the machine and all accessories thoroughly.
7.2 Daily
• Clean all accessible surfaces with a soft, damp cloth.
7.3 Weekly
• Clean all accessible surfaces with a soft damp cloth and common household detergents.
7.4 Monthly
7.4.1 LaboForce-50 - pressure feet
The force on the pressure feet is generated by friction pins held in place by the screws in the spring
housing.
• Use an Allen key to tighten the screws.
A Screws
7.5 Spare parts
For specific safety related parts, see the section "Safety Related Parts of the Control System
(SRP/CS)" in the section "Technical data" in this manual.
Technical questions and spare parts
If you have technical questions or when you order spare parts, state serial number and
voltage/frequency. The serial number and the voltage are stated on the type plate of the machine.
16 LaboForce-50
7 Maintenance and service
To Next Page
Loading...
