The specimen mover
A Housing
B Force indicators
C Quick release ring
D Force adjustment screw
E Pressure feet
4 Transport and storage
If, at any time after the installation, you have to move the unit or place it in storage, there is a
number of guidelines we recommend that you follow.
• Package the unit securely before transportation. Insufficient packaging could cause damage
to the unit and will void the warranty. Contact Struers Service.
• We recommend that you use the original packaging and fittings.
4.1 Long-term storage or shipping
For instructions on how to prepare the unit for long-term storage or shipping, see the specific
machine manual.
Pay specific attention to the following:
• Disconnect the unit from the electrical power supply.
• Remove the control panel or specimen mover.
• Place the machine and accessories in their original packaging.
5 Installation
5.1 Unpack the machine
Note
We recommend that you keep all original packaging and fittings for future use.
4 Transport and storage
LaboForce-50 9
To Next Page
Loading...
