Struers LaboForce-50 - Declaration of Incorporation

Based on: 16357902 C
Declaration of Incorporation of
PartlyCompletedMachinery
Manufacturer Struers ApS • Pederstrupvej 84 • DK-2750 Ballerup • Denmark
Name LaboForce-50
Function Specimen mover for LaboPol-20, LaboPol-30, LaboPol-60
Grinding/Polishing machine
Type 635
Cat. no. 06356127
The above listed machinery is only intended to be used
with:
And shall not be put into service until the final machinery
into which it is to be incorporated has been declared in
conformity with this regulation, where appropriate.
LaboPol-20, LaboPol-30, LaboPol-60
Serial no.
Module H, according to global approach
EU
We declare that the product mentioned is in conformity with the following legislation, directives and standards:
2006/42/EC EN ISO 12100:2010, EN ISO 13849-1:2015, EN ISO 13849-2:2012, EN 60204-1:2018. EN 60204-1-
2018/Corr.:2020
2011/65/EU EN 63000:2018
2014/30/EU EN 61000-3-2:2014, EN 61000-3-3:2013, EN 61000-6-1:2007, EN 61000-6-3:2007, EN 61000-6-3-
A1:2011, EN 61000-6-3-A1-AC:2012
Additional standards NFPA 79, FCC 47 CFR Part 15 Subpart B
Authorized to compile technical file/
Authorized signatory
Date: [Release date]