A Disc speed control
Button Function
Disc rotation
• Starts rotation of the disc (Spin function).
Water
Manual override
• Press the button to apply water. Water is applied when no process is running.
• Press the button again to stop applying water.
Start
• Starts the preparation process.
Stop
• Stops the preparation process.
7 Maintenance and service
Technical questions and spare parts
If you have technical questions or when you order spare parts, state serial number and
voltage/frequency. The serial number and the voltage are stated on the type plate of the machine.
7.1 General cleaning
To ensure a longer lifetime for your machine, we strongly recommends regular cleaning.
Note
Do not use a dry cloth as the surfaces are not scratch resistant.
7 Maintenance and service
LaboForce-50 15
To Next Page
Loading...
