Struers LaboForce-50 - Manual Overview; Intended Use; Safety Precautions

1 About this manual
CAUTION
Struers equipment must only be used in connection with and as described in the
Instruction Manual supplied with the equipment.
Note
Read the Instruction Manual carefully before use.
Note
If you wish to view specific information in detail, see the online version of this
manual.
2 Safety
2.1 Intended use
The device is for professional semi-automatic materialographic preparation (grinding or polishing)
of materials for further materialographic inspection.
LaboForce-50 is intended to be used in combination with:
• LaboPol-20
• LaboPol-30
• LaboPol-60
Do not use the machine for
the following
Other equipment than stated in the section "Intended use".
Model LaboForce-50
2.2 LaboForce-50safety precautions
2.2.1 Read carefully before use
Ignoring this information and mishandling of the equipment can lead to severe bodily injuries and
material damage.
1 About this manual
LaboForce-50 5