Studer RCC-02 User Manual

Studer Innotec SA
RCC-02/-03
User manual V4.4.0 7
2 WARNINGS AND CAUTION
2.1 WARRANTY
Studer Innotec warrants its full range of inverters to be free from defects in workmanship and materials
for a period of 5 years from the date of manufacture.
Any warranty claim will be refused if it is not sent back to the point of sale, or another place indicated
by Studer Innotec, in appropriate packaging and accompanied by a copy of the dated proof of
purchase.
No warranty claims will be accepted for damage resulting from handling, usage or processing that
does not explicitly appear in this manual.
Cases of damage arising from the following causes are notably excluded from the warranty:
 Inappropriate use
 The presence of liquids in the device or oxidation resulting from condensation
 Damage resulting from falls or mechanical shocks
 The opening or alteration of the RCC remote control, carried out without the explicit
authorization of Studer Innotec
 Damage due to atmospheric surge voltage (lightning)
 Damage from transportation due to inappropriate packaging
2.2 LIMITATION OF RESPONSABILITY
The placement, commissioning, use, maintenance and servicing of the RCC remote control cannot
be the subject of monitoring by Studer Innotec. For this reasons Studer Innotec assumes no
responsibility and liability for damage, costs or losses resulting from an installation that does not
conform to the instructions, from a defective functioning or from a deficient maintenance.
The use of Studer Innotec devices is the responsibility of the customer in all cases. This equipment is
neither designed nor guaranteed to supply installations used for vital medical care nor any other
critical installation carrying significant potential damage risks to people or the environment.
Studer Innotec does not assume any responsibility for the infringement of patent rights or other rights
of third parties that result from using the devices.
The responsibility of Studer Innotec may not under any circumstances exceed the amount spent to
purchase the product.
Studer Innotec reserves the right to make any modifications to the product without prior notification.
2.3 SAFETY INSTRUCTIONS
Carefully read the following safety instructions in order to avoid any injury or risk of damaging this
product and those that are connected to it.
Only use the connection cable specified and supplied by Studer Innotec. Under no circumstances
should you use a damaged cable. In case of doubt about the condition of this device, it should be
inspected by a qualified technician.
Do not use the RCC remote control in a humid environment.
Do not use the RCC remote control in an explosive environment.
2.4 ACCEPTANCE OF THE SOFTWARE LICENCE AND UPDATES
By using the RCC remote control, you are accepting the terms and conditions of the following
licence agreement. Please read this carefully.
Studer Innotec is granting a limited licence to use the software installed in this equipment in its
executable binary format during the normal functioning of the product. The title, the property rights
and the copyrights relating to this software, remain the property of Studer Innotec.
You acknowledge that the software is the property of Studer Innotec and that it is protected by
copyright law according to the international copyright treaties.

Studer RCC-02 Specifications

General

Brand	Studer
Model	RCC-02
Category	Remote Control
Language	English