Studer Innotec SA
RCC-02/-03
8 V4.4.0 User manual
You also acknowledge that the structure, organisation and software code are valuable commercial
secrets belonging to Studer Innotec. You agree not to decompile, disassemble, alter or reverse either
the unit or the engineering or make the software readable, irrespective of which part of the software,
or to create any work whatever that is based on this software.
Updating must be done in the full awareness of the cause and is always the responsibility of the
customer. Partial updates may cause ruptures in the compatibility or in its stochastic operation.
2.5 COMPATIBILITY
Studer Innotec guarantees the compatibility of the software updates with the hardware for one year,
starting from the date of purchase. The updates are no longer guaranteed beyond this date and a
hardware upgrade may be required. Please contact your reseller for any additional information on
compatibility.
2.6 ACCESS CODE FOR EXTENDED FUNCTIONS
In order to use the RCC-02, RCC-03 remote control in extended mode, you must have installer or QSP
(Qualified Service Partner) level authorisation from Studer Innotec. After your accreditation you will
receive a code number which will allow you to access these functions. This code number is
exclusively valid for devices manufactured during the current year or older; the most recent code
may therefore be used for all operations.
Fill in the code you have received below in order to take advantage of the extended functions of
the RCC-02, RCC-03 remote control.
The additional functions available with a professional user level appear in gray in this manual.
Depending on your access code, you may not have access to all the functions described in this
manual. Certain functions are reserved for servicing or factory testing. Please ask your supplier for
more details on this subject.
To Next Page
Loading...
Need help?
General
