Studer RCC-02 - ACTIVATING AND DEACTIVATING THE COMBI XTENDER; QUICK SETTING OF THE MAXIMUM SOURCE AC CURRENT

Studer Innotec SA
RCC-02/-03
User manual V4.4.0 19
7 BASIC DISPLAYS
When the remote control is connected to an Xtender, it is possible to access to different display
menus divided into distinct categories.
Information on the system
The history of events occurring in the installation
Real time information displays on the operating mode of
the installation
The different measures carried out by the BSP
(Only if a BSP is present)
The different measures carried out by the VarioTrack
(Only if a VarioTrack MPPT is present)
The different measures carried out by the VarioString
(Only if a VarioString MPPT is present)
Adjustment of RCC remote control options
Adjustment of configurations on the Xtender(s)
The settings of the BSP
(Only if a BSP is present)
The settings of the VarioTrack
(Only if a VarioTrack MPPT is present)
Information
Settings