Studer RCC-02 - INSTALLER - Cos phi at P=0% {1622}; INSTALLER - Cos phi at a given power. Cos phi {1623}, P= {1613}; INSTALLER - Cos phi at P=100% {1624}

Studer Innotec SA
RCC-02/-03
User manual V4.4.0 75
14.15.5 INSTALLER - Cos phi at P=0% {1622}
This parameter determines the phase of the current at minimal grid-feeding power (point to the far
left on the curve). You can choose an inductive cos phi down to 0.9, a capacitive cos phi of up til
0.9 or a neutral cos phi of 1.
14.15.6 INSTALLER - Cos phi at a given power. Cos phi {1623}, P= {1613}
You may set a variable point on the dephased curve and this parameter will let you determine the
power and phase of that point. The power can be selected in the range of 20 to 85% Pnom and the
Cos phi within the limits of 0.9 capacitive to 0.9 inductive.
14.15.7 INSTALLER - Cos phi at P=100% {1624}
With this parameter you can select the cos phi at maximal grid-feding power (Pnom of the Xtender).
The value can be chosen in between 0.9 capacitive and 0.9 inductive.