Subaru 2011 Forester - Page 229

Black plate (234,1)
北米Model "A8160BE-B" EDITED: 2010/ 10/ 14
5-50 Audio
38 security sécurité
39 pair phone
jumeler le télé-
phone
40 change name modifier le nom
41 select phone
sélectionner le tél-
éphone
42 list phones
lister les télé-
phones
43 set pass key
configurer le
passe-partout
44 add entry ajouter l’entrée
45 delete entry supprimer l’entrée
46 delete speed dial
supprimer compo-
sition abrégée
47 by voice vocalement
48 by phone par téléphone
49 call history historique d’appels
50 set speed dial
configurer compo-
sition abrégée
51 incoming entrant
52 outgoing sortant
53 list names lister les noms
54 set PIN configurer NIP
55 phone book lock
verrouiller le regis-
tre
! Updating phonebook data
NOTE
The maximum number of phonebook
entries that can be registered in the
phonebook is 50.
! Registering by voice
1. Select the “BY VOICE” menu.
2. Press the talk switch
.
3. Say the phone number to be regis-
tered.
4. Select the “CONFIRM” menu.
5. Select the “RECORD NAME” menu by
operating the “TUNE/TRACK/CH” dial or
press the talk switch
.
6. Say the name (voice tag) to be
registered.
7. Select the “ CONFIRM” menu. Then
“STORED” is displayed and the mode
changes to the re gistering speed dial
mode. Refer to “Registering speed dial”
F5-51.
! Registering by phone
1. Select the “BY PHONE” menu.
2. Select the “ CONFIRM” menu. Then
“TRANSFER” is displayed.
3. Transfer the data from the cell phone.
For details about transferring the data,
refer to the Owner’s Manual of the cell
phone.
4. Select the “RECORD NAME” menu by
operating the “TUNE/TRACK/CH” dial or
press the talk switch
.
5. Say the name (voice tag) to be
registered.
6. Select the “CONFIRM” menu. Then
“STORED” is displayed and the mode
cha nges to the registering speed dial
mode. Refer to “Registering speed dial”
F5-51.
! Registering by inputting manually
1. Select the “MANUAL INPUT” menu by
operating the “TUNE/TRACK/CH” dial.
2. Input the phone number to be regis-
tered.
3. Select the “RECORD NAME” menu by
operating the “TUNE/TRACK/CH” dial or
press the talk switch
.
4. Say the name (voice tag) to be
registered.
5. Select the “CONFIRM” menu. Then
“STORED” is displayed and the mode
cha nges to the registering speed dial
mode. Refer to “Registering speed dial”
F5-51.
NOTE
While inputting the phone numbers, if