Subaru 2011 Forester - Page 230

Black plate (235,1)
北米Model "A8160BE-B" EDITED: 2010/ 10/ 14
“GO BACK” (type C audio)/“BS” (type
D audio) is chosen using the “TUNE/
TRACK/CH” dial, the character that was
input last is deleted.
! Registering from call history
1. Select the “CALL HISTORY” menu.
2. Select “OUTGOING” or “INCOMING ”
by operating the “TUNE/TRACK/CH” dial.
3. Select the phone number by operating
the “TUNE/TRACK/CH” dial.
4. Select the “RECORD NAME” menu by
operating the “TUNE/TRACK/CH” dial or
press the talk switch
.
5. Say the name (voice tag) to be
registered.
6. Select the “ CONFIRM” menu. Then
“STORED” is displayed and the mode
changes to t he registering speed dial
mode. Refer to “Registering speed dial”
F5-51.
! Registering from redial
1. Select the “REDIAL” menu.
2. Select the phone number by operating
the “TUNE/TRACK/CH” dial.
3. Select the “STORE” menu.
4. Select the “CONFIRM” menu.
5. Select the “RECORD NAME” menu by
operating the “TUNE/TRACK/CH” dial or
press the talk switch
.
6. Say the name (voice tag) to be
registered.
7. Select the “ CONFIRM” menu. Then
“STORED” is displayed and the mode
changes to the re gistering speed dial
mode. Refer to “Registering speed dial”
F5-51.
! Registering from call back
1. Select the “CALL BACK” menu.
2. Select the phone number by operating
the “TUNE/TRACK/CH” dial.
3. Select the “STORE” menu.
4. Select the “CONFIRM” menu.
5. Select the “RECORD NAME” menu by
operating the “TUNE/TRACK/CH” dial or
press the talk switch
.
6. Say the name (voice tag) to be
registered.
7. Select the “ CONFIRM” menu. Then
“STORED” is displayed and the mode
changes to the re gistering speed dial
mode. Refer to “Registering speed dial”
F5-51.
! Registering speed dial
1. After registering phonebook data, se-
lect the “SPEED DIAL” menu.
2. Press the preset button (from
to
) in which you want to register the
phone number.
NOTE
If the number to be used is already
registered in speed dial, “OVER-
WRITE?” will be displayed.
! List names function
The voice tags registered in the phone-
book are spoken by using the list names
function. To use the list names function,
perform the following procedure.
1. Select the “LIST NAMES” menu.
2. Choose the registered data by press-
ing the talk switch
or by operating the
“TUNE/TRACK/CH” dial. Then “ SE-
LECTED” is displayed. You can choose
the following menus.
. “DIAL” to make a phone call
. “CHANGE NAME” to change the name
(voice tag)
. “SET SPD DIAL”/“SET SPEED DIAL”
to set the speed dial
. “DELETE ENTRY” to delete the name
(voice tag) from the phonebook
. “GO BACK” to go back to the menu
mode
NOTE
. After “LIST NAMES” is selected, if
Audio 5-51
– CONTINUED –
5