13
English
Operation
2.4 Switching on the display
• Automatically, on submerging in water* or when adaptation to atmospheric
pressure is necessary;
• Manually, by pushing
or . If switched on with all segments
light up for 5 seconds.
Afterwards the display shows the time of the day, the O
2
mix and the
temperature.
F
This display is called time of day display. Most navigation descrip-
tions start from this display. At the surface XP-H returns automati-
cally to this display.
If there is a remaining saturation from the last dive or from a change of altitude,
XP-H also displays the "do not fly" time, the "do not fly" icon, the current
altitude range and the prohibited altitude range (->27).
F
When XP-H is in state of rest no information is displayed but the
atmospheric pressure is continuously monitored. If a change in
altitude range is detected, XP-H switches on for 3 minutes automati-
cally ->27.
* Only if the option
"
Water contacts on
"
(
"
set 1
"
, ->47) is chosen. See warning ->10.
2.5 How to navigate XP-H at the surface
Starting from the time of day display you can enter into different menus.
/
/
• Enter with into the
function or sub menu.
• With you can switch
to the time of day display.
• After 3 minutes without
operation XP-H returns to
the time of day display.
Off
Time of day display
• (Desat. time CNS O
2
% ) ->14
• Date
->14
• Battery condition
->14
• Depth alarm -> 45
• Dive time alarm -> 46
• Safety stop time -> 46
• ppO2 max -> 46
• Tank pressure alarms -> 46
• Reset to air -> 46
• PDIS -> 46
• Unit system -> 46
• Unit system, tank -> 47
• Salt water -> 47
• Light time -> 47
• Attention beep -> 47
• Water contacts -> 47
• Reset desaturation -> 48
• Alarm clock ->48
• UTC time zone ->49
• Time of day ->49
• Date ->49
• 24h / AM PM ->49
• LCD contrast ->49
• IrDA speed ->50
• Sound on / off ->50
• Electronic ID ->50
Set 1
->45
Logbook
->43
Dive
planner
->42
Time of day display
O
2
mix /
ppO
2
max
->20
MB level
->31
Gauge
mode
->29
Altitude
meter
-> 27
Set 2
->48
To Next Page
Loading...
