EasyManua.ls Logo

SubGear XP-H - Introduction and Manual Conventions; Important Remarks on Symbols; Manual Input Instructions

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Introduction
Congratulations on purchasing XP-H and welcome to SUBGEAR. From now on you will enjoy the
assistance of an extraordinary dive computer - equipped with SUBGEAR innovative technology - while
diving.
We thank you for choosing XP-H and we hope you will enjoy safe dives in the future! Further information
on SUBGEAR and SUBGEAR products can be found on our web page at www.subgear.com.
To make this manual easier to read we will use the term "
XP-H
" as an abbreviation for "SUBGEAR
XP-H
diving computer" throughout this booklet.
Safety considerations
Dive computers provide divers with data; they, however, do not provide the knowledge about how this
data should be understood and applied. Dive computers cannot replace common sense! You must
therefore carefully read and understand this entire manual before using your XP-H.
Important remarks concerning signal words and symbols
This operating manual makes use of the following icons to indicate especially important comments:
F
Remarks Information and tips which are important for optimal use of the functions of
XP-H.
!
Danger! Indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injury.
The following symbols are used in the operating manual:
Flashing display -> Page reference e.g. ->6
Audible signals
Audible attention signal
4s
Audible alarm signal
Introduction
Instructions for manual input
Press left push button
Press and hold (1 second)
left push button
Press and hold (1 second)
both push buttons
Press right push
button
Press and hold
(1 second)
right push button
Alternate displays
By pushing during the dive you can scroll
through alternate displays.
How to get back to the first display:
scrolling with through the displays
after 5 seconds: automatically if marked with
after 5 seconds: directly by pushing 1x
E.g. Max depth > Temperature >
Temperature, Time > Max depth
Time out after 5 seconds without operation.
Display switches back to original indication.

Table of Contents

Related product manuals