Level stop duration
Decompression stop depth = level stop depth
8.5 Complete a dive with MB levels
A dive with MB levels is completed the same way as a dive
without MB levels (L0), save for the following exceptions:
If the MB level has been reduced during the dive, XP-H will
display a flashing MB level symbol and the current MB level
for five minutes after reaching the surface. The dive is then
completed and XP-H changes to user mode with the MB level
switching back to the original MB setting.
Repetitive dives and MB levels: If during a dive a level stop is being ignored and the diver starts another
descent shortly afterwards, XP-H might immediately request level stops. To complete the dive with the
initially set MB level all level stops must be observed.
To Next Page
Loading...
