EasyManua.ls Logo

SubGear XP-H - Warranty Information

Default Icon
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
54
Appendix
!
WARNING
9. Check the proper polarity of the battery. XP-H can be damaged if you do not
insert the battery correctly.
Insert the new battery, with "+" pointing outwards, into the battery
compartment.
After battery replacement XP-H will perform an automatic test (8s) and gives a short beep when the
test is done.
!
WARNING
10. The battery cap can be installed with a ±120° offset. The alignment circles
are there to ensure proper positioning of the cap. If the rotation is stopped
before alignment, watertightness may not be ensured. If the rotation is
forced beyond the alignment, the cap may break. Damage to XP-H due to
improper placement of the battery cap is not covered by warranty.
Alignment circles
Push the battery cap firmly down and turn it clockwise until the two circles are aligned.
11. Check XP-H by switching on
->14 .
3 Warranty
The warranty only covers dive computers which have been bought from an authorized SUBGEAR
retailer. The warranty is given for a period of two years.
Repairs or replacements during the warranty period do not increase the warranty period.
In order to put forward a warranty claim: send the dive computer together with a dated receipt of the
purchase to your authorized retailer or an authorized servicing point.
SUBGEAR reserves the right to determine the merits of a warranty claim and to determine whether the
computer will be repaired or replaced.
Excluded are faults or defects due to:
excessive wear and tear;
exterior influences, e.g. transport damage, damage due to bumping and hitting, influences of
weather or other natural phenomena;
servicing, repairs or the opening of the dive computer by anybody not authorized by the
manufacturer;
pressure tests which do not take place in water;
diving accidents;
improper placement of the battery cap.
Your SUBGEAR dive instrument is manufactured with high-quality components, which can
be recycled and reused. Customers living in the European Union can contribute to the
protection of environment and health, by returning old products to an appropriate collection
point in your neighborhood according to EU Directive 2002/96/EC. Products marked with
the recycling symbol to the left must not be placed in the normal household waste.

Table of Contents

Related product manuals