45
English
VI Settings
Statistic information
From the time of day display you can get the following statistic information over all dives.
Push , and :
Leaving the logbook
By pushing once or twice
you can exit the
logbook.
The logbook closes automatically after 3 minutes without operation.
VI Settings
1 Menu "set 1"
With menu "set 1" or Dive.Log you can configure the following items (dive functions):
Setting Range Default Page
• Depth alarm
• Dive time alarm
• Safety stop time
• Maximum partial pressure of oxygen
(ppO2max)
• Tank pressure warning and alarm
• Time limit to reset the O2% mix to air
• PDIS
• Unit system
• Tank pressure unit
• Salt water
• Backlight duration
• Audible attention signals
• Water contacts
• Reset desaturation
5-100m / 15-330ft
5-195 min
off, 1-5 min
1,2-1,6bar/off
warning 50-200bar / 750-3000psi,
alarm 20-120bar / 300-1750psi
1-48h/no reset
on / off
metric/imperial
bar / psi
on / off
2-12s / push on/off
on/off (Dive.Log: selective)
on/off
on/off
40m/130ft
60min
3min
1,4bar
100bar/1450psi
40bar/600psi
no reset
off
(depends on
region)
bar
on
6s
on
on
no reset
45
46
46
46
46
46
46
46
47
47
45
47
47
48
Starting from the time of day display push
or until "set 1"
appears.
Confirm that you wish to enter into the menu of "set 1" by pushing
.
Once entered into the menu you can scroll with and through
the menu.
Setting the dive depth alarm
1. Confirm that you wish to change the depth alarm by pushing
.
2. Change the value in increments of 1m (5 ft) by pushing
or .
3. Switch between 'on' or 'off' by pressing .
4. Confirm the setting with .
To Next Page
Loading...
