108
Switching On / Off (0/1)
1) Start up
If operating with one device only, the device has to be turned off with 0/7, then the requested
command has to be sent via remote control.
If operating with more devices, see chapter 5.0 (ADVANCED model) and 5.2 (WIRELESS model): to
put devices in operation, select correct command on remote control to activate requested
ventilation mode.
ATTENTION: At first power on, the product performs automatic adjustment of the hydrostat. It is
possible that during this process, the "EXTRACTION" function gets activated to bring the humidity of
the room to the level necessary for the automatic adjustment itself.
ATTENTION
It’s possible that on the first start up the feature “withdrawal” is automatically turned on to bring the
humidity on a
appropriate niveau
2) Remote control of air ventilaton
List of commands
V5 -> Speed 5 H3 -> Humid 70%
V4 -> Speed 4 H2 -> Humid 55%
V3 -> Speed 3 H1 -> Humid 40%
V2 -> Speed 2
V1 -> Speed 1
S -> Monitoring
To Next Page
Loading...
Need help?
General
