85
Once the length of the recessed tube (6) is fitted to the exact thickness of the wall, place the particular
external wall mounting (4e) on the outer wall, as shown in the image below:
M=500mm M=700mm
Once it is centered in the tube, draw the mounting holes on the outer wall, by using the particular
external wall mounting (4e) and with the help of a level measuring tool to ensure a precise installation
as in the image below:
Drill the holes and insert the dowels for the wall
mounting.
Screw the particular external wall mounting (4e) to the
outer wall.
Attach the external conveyor snap-lock (5) to the external wall mounting (4e), as shown in the
images:
To Next Page
Loading...
Need help?
General
