Introduction
2
INTRODUCTION
Congratulations on your purchase of the Sweepway unload system. Your Sukup Sweepway is designed,
built and tested to ensure highest quality and maximum life.
Read and study operator’s manual carefully to learn how to safely install and operate your machine.
Failure to do so could cause personal injury or equipment damage.
For your convenience, fill in the following information:
Sweepway: 6"_______ 8" ________ 10" _______ Bin Diameter: _______
NOTE: References to 6”, 8” or 10” Sweepways refer to diameter of unload tube, not to diameter of sweep
auger.
With Horizontal Unload: Single Motor Drive _____
With Vertical Unload: 16' _____ 20' _____
2 Motor Drive (2 Motor Top_____ 2 Motor Bottom_____) Single Motor Drive _____
25 Incline: 6" to 8" _____ 8" to 10" _____ 20 Incline: 10" to 12" _____
Date of Purchase: _______________________________
DISCLAIMER: Bin sweeps will vary in performance based on grain condition and condition of bin floor.
Any capacities provided by Sukup Manufacturing Co. are based on dry, clean corn and ideal conditions.
It may take two passes over a given area to remove grain, with a layer of grain remaining on floor
afterward.
To Next Page
Loading...