Safety
7
Safety Decals for Sweepway
Safety decals should be mounted on your equipment
as shown in this safety section. Yearly and prior to
equipment use, check that all decals and shields are
in place and legible.
To order a replacement decal or shield at no charge,
contact your dealer or Sukup Manufacturing Co., Box
677, Sheffield, IA USA 50475. If replacement is
necessary, make sure location for decal is free from
grease, oil and dirt. Remove backing from decal and
place in proper position.
Decals 1-5 are factory-mounted. Additional copies of
decals 1 and 4 are shipped with this manual in
separate packet #A3399 and have mounting
instructions inside packet.
IMPORTANT: If suggested locations are not clearly
visible, place safety decals in a more suitable area.
Never cover up any existing safety decals.
1. DECAL L0281 – WARNING: To avoid serious
injury or death. Mount this decal on bin sheet
near door handle.
2. DECAL L0271 - DANGER: Shield missing. Do not
operate!
3. DECAL L0284 – WARNING: Keep away from all
moving parts.
4. DECAL L0258A – DANGER: Do not enter this
bin! Keep clear of all augers. Mount this decal on
bin sheet near door handle and near ladder
leading to roof.
5. DECAL L03061 – DANGER: Keep away when
auger is running!
6. DECAL L0328 – Sweepway Operation. Mount
this decal on bin sidewall near sump openers.
To Next Page
Loading...