16E / 16E-H / 16E-P Spray Gun
3
MAN 96150 EN 01
Intended Use
The 16E / 16E-H / 16E-P Spray Gun is a hand-held combustion ther-
mal spray gun for applying flame spray coatings using metalizing wire.
It is compatible with all commonly available combustion gas fuels
including acetylene, hydrogen, propane, natural gas, and MAPP/MPS.
The standard 16E is intended for most wires and gas fuels. The 16E-H
is intended for feeding softer wires at a higher speeds. The 16E-P is
specifically intended for use with propane.
See “Technical Data” on page 15 for detailed specifications.
Information About this Manual
The information in this manual is intended to ensure safe and optimal
operation of the 16E / 16E-H / 16E-P Spray Gun.
Keep this manual near your system.
Additional Documents
• 16E / 16E-H / 16E-P Spray Gun Parts List, PL 96151
• 16E / 16E-H / 16E-P Spray Gun Spray Parameters, PAR 96447
Copyright Restrictions
The reproduction, duplication or distribution of this manual, in whole or
in part, by any means, without prior written permission from Sulzer
Metco, is strictly prohibited.
Designation Characteristics
16E
16E-H
16E-P
Standard wire gun
High-speed wire gun
Propane wire gun
Spray Process Combustion wire
Compatibility:
Spray Controllers •3AF
•3GF
Material Feeder •2W
DANGER
Do not use the 16E /
16E-H / 16E-P Spray
Gun for any application
or purpose other than
that described in this
manual. Improper use
or application can result
in equipment damage or
personal injury.
To Next Page
Loading...