Sulzer 16E - Page 67

16E / 16E-H / 16E-P Spray Gun
67
MAN 96150 EN 01
15. Install air plunger (95) in gas head subassembly (85).
16. Install one o-ring (99) each on two fuel gas and oxygen plungers
(98).
17. Install fuel gas and oxygen plungers (98) in gas head subassem-
bly (85).
18. Install three compression springs (100) over plungers (95, 98) in
gas head subassembly (85).
19. Install three o-rings (85) in valve block (101).
20. Install valve block (101) on bottom of gas head subassembly (85)
and secure with two screws (102 and 103).