Summa S One Series - User Manual

User Manual
Rev 001

Summary

1 SETUP

1.1 Safety

Provides essential safety information for operating the machine.

1.1.1 General

1.1.3 Safety precautions

Warnings about children, sharp knives, and moving machine parts.

1.1.4 Electrical shock hazard

Guidelines on grounding, wall sockets, and operating voltage safety.

1.2 S One Cutter Components

1.3 Powering-on the cutter

Step-by-step instructions for safely powering on the cutting machine.

1.4 Connecting the Cutter to a Computer

Guides on establishing communication between the cutter and a computer.

1.4.1 USB connection

1.4.1.1 Connecting the S One cutter to a PC, using a USB cable

1.4.2 Wired Ethernet connection

1.4.2.1 Use static address

1.4.2.2 In case the DHCP server is used

1.5 Loading Media

Procedures for loading various types of media into the cutter.

1.5.1 Pinch roller positioning

Explains how to correctly position the pinch rollers for media handling.

1.5.2 Loading media

Detailed steps for loading roll media using core holders or without.

2 BASIC OPERATION

2.1 Touchscreen

Overview of the touchscreen interface and its functions.

2.1.2 Basic operation

2.2 How to Set Tool Parameters

Details how to configure parameters for different tools like knives and pens.

2.2.1 Setting the tool type

Guides on selecting and setting the active tool (knife, pen).

2.2.2 Changing the tool pressure

Instructions for adjusting the cutting pressure for the selected tool.

2.2.3 Changing the drag knife offset

How to set the offset distance for the drag knife for optimal cutting.

2.3 How to Set the Cutting Speed

Explains how to adjust the cutting speed parameters for optimal performance.

2.4 How to Change the User (Quick Parameter Change)

2.5 How to Make Sure the Sign Has the Correct Size

Instructions for performing length calibration to ensure accurate sign dimensions.

2.6 Cutting through

Details the functionality for cutting material completely through.

2.6.1 Procedure

3 OPOS

3.2 Basic OPOS operation

Outlines the general steps for performing contour cutting with OPOS.

3.2.1 Printing the graphic

3.2.2 Different OPOS alignment methods

3.2.3 Processing long jobs

3.3 Automating OPOS tasks

Discusses automation options like automatic start and multiple copies.

3.3.1 OPOS origin

3.3.4 OPOS Barcode

3.4 Calibrating OPOS

Guides on performing necessary calibrations for accurate OPOS performance.

3.4.1 OPOS calibration

Steps for calibrating the OPOS sensor itself.

3.4.2 Media calibration

Process for calibrating the sensor to different media types and colours.

4 DETAILED OPERATION

4.2 Main menu

Describes the structure and navigation of the cutter's main menu.

4.2.1 Pressure

4.2.2 Knife offset

Details on adjusting the knife offset, explained in a later section.

4.2.3 FlexCut

Explains the FlexCut feature for cutting through materials.

4.2.4 Tool

4.3 Action menu

Access to various actions like confidence tests and replotting.

4.3.1 Confidence test

4.4 Settings menu

Access to various operational settings and features.

4.4.1 Velocity

4.4.5 Panel

4.5 Configuration menu

Settings related to cutter configuration and connectivity.

4.5.1 Ethernet

4.5.2 Wi-Fi

4.5.3 USB Port

4.5.6 OPOS Parameters

5 MAINTENANCE

5.1.1 Cleaning the drive system

5.1.2 Cleaning the media sensors

5.1.3 Cleaning the Y-Guide Rail

5.1.4 Changing the fuse

6 SPECIFICATIONS AND GENERAL INFORMATION

6.1.3 Software

6.2 Technical Specifications

Comprehensive technical data for the S One cutter series.

6.2.3 Media handling

6.2.4 Performance

Key performance metrics like speed, resolution, and accuracy.

6.2.5 Interface

Summa S One Series Specifications

General

Connectivity	USB, Ethernet
Drive Technology	Servo motor
OPOS Alignment	Yes
Contour Cutting Accuracy	± 0.1 mm
Media Type	Vinyl, Film, Reflective
Repeatability	± 0.1 mm
Resolution	0.025 mm
Power Requirements	100-240 V AC, 50-60 Hz