Need help?Do you have a question about the Summa S CLASS and is the answer not in the manual?
Instructions for removing the cutter from its packaging.
Identifies and describes the main parts of the cutter visible from the front.
Details on how to properly connect the cutter to the power supply.
Guide for establishing communication between the cutter and a computer via USB or RS-232.
Procedures for correctly loading various types of media into the cutter.
Step-by-step instructions for installing different cutting tools like knives and pens.
Overview of the touch screen interface, its buttons, and navigation.
Guide on adjusting parameters like tool type, pressure, and offset for different tools.
Instructions on configuring the cutter's speed settings for optimal performance.
How to switch between different user configurations for quick parameter changes.
Procedure for calibrating the cutter's media length accuracy.
Explains shortcuts on the touch screen for quick access to common functions.
Techniques and settings for cutting challenging media types.
Describes the functions available in the cutter's Action Menu.
Details the structure and options within the cutter's configuration menu.
Instructions for cleaning the cutter's drive system to ensure optimal performance.
Guide on how to clean the media sensors to maintain accurate media detection.
Procedures for cleaning the Y-guide rail where the tool carriage slides.
Steps to clean the nose piece on tangential machines for better cut quality.
Guide on cleaning the OPOS sensor to ensure accurate optical positioning.
Instructions for safely replacing the fuse in the cutter's power entry module.
Explains the Optical Positioning System (OPOS) and its role in contour cutting.
Outlines the general steps for performing contour cutting using OPOS.
Covers OPOS and Media calibration processes for accurate marker reading.
In-depth guide on creating graphics, setting parameters, and cutting contours with OPOS.
Methods for automating repetitive cutting tasks using OPOS features.
Functionality for cutting shapes completely through the media, often combined with contour cutting.
Overview of the S CLASS™ cutter range and their main features.
Detailed physical and media compatibility specifications for all S CLASS™ models.
Information on included tools, communication interfaces, and firmware details.
Cutting performance metrics, accuracy, and safety certifications.
Operating conditions, power requirements, and fuse rating.
Lists part numbers and descriptions for cutter accessories and consumables.
General| Connectivity | USB, Ethernet |
|---|---|
| Interface | USB, Ethernet |
| Power Requirements | 100-240 VAC, 50/60 Hz |
| Maximum Cutting Width | 63 inches (1600 mm) |
| Media Types | Vinyl, paper |
| Cutting Width | 63 inches (1600 mm) |
| Media Thickness | Up to 0.25 mm (10 mil) |
To Next Page