S CLASS™ cutter User’s Manual
Setup 1-25
1.4.3.3 Webserver
The cutter has an internal web server.
By typing the IP address (e.g. http://192.168.1.100 ) in to internet explorer address bar, a
simplified online version of Summa cutter Control is started, which is accessible from any
computer, on any platform (e.g. windows, Macintosh, Linux).
Some combinations OS – browser may not work, if so then either reload the page partially
or install another internet browser.
Note: Some settings in the firewall or in the internet connection setup might prevent the
use of the internal webserver of the cutter. Contact the network administrator if this is the
case.
To Next Page
Loading...
