Need help?Do you have a question about the Summa S class 2 series and is the answer not in the manual?
Detailed steps for safely unpacking the cutter and assembling its stand.
Identification and description of the cutter's front and rear components.
Essential safety guidelines, operating environment, and proper mains power connection.
Instructions for powering on the cutter and establishing USB or Ethernet connections.
Procedures for loading media, positioning pinch rollers, and setting pressure.
Guide for installing and replacing cutting tools like knives, pens, and pouncing pins.
Explanation of the touch screen layout, buttons, navigation, and status line.
Adjusting tool type, pressure, offset, and calibrating tangential knives.
Procedures for setting cutting speed and performing media length calibration.
Explains the Optical Positioning System for accurate contour cutting.
Steps for contour cutting: graphic creation, printing, loading, and cutting.
Detailed procedures for OPOS and media calibration for optimal accuracy.
Features for automating repetitive tasks like multiple copies and barcode jobs.
Differences and procedures for using a camera with the OPOS system.
Using the cutting through feature for simple shapes and material penetration.
Accessing functions like OPOS Barcode, Cut Tests, and File Operations.
Comprehensive settings for Tool, Velocity, Pressure, OPOS, Communication, and more.
Instructions for cleaning drive systems, media sensors, and Y-guide rails.
Procedures for cleaning the nose piece and the OPOS sensor.
Step-by-step guide on how to safely change the cutter's fuse.
Details on the S CLASS 2 cutter range and its key functionalities.
Specifications for Cutter, Media, Tools, Interface, Performance, and Environment.
List of compatible accessories, consumables, and their part numbers.
General| Configuration | Tangential knife cutter |
|---|---|
| Connectivity | USB, Ethernet |
| Tool Types | Drag knives, Tangential knives |
| Resolution | 0.0004 inches (0.01 mm) |
| Power Requirements | 100-240 VAC, 50/60 Hz |
To Next Page