Summa S class 2 series - S CLASS 2 Environmental Specifications; Environmental

S CLASS™ 2 cutter User’s Manual
Specifications 6-7
6.2.8 Environmental
(Cutter without media)
Operating Temperature
15 to 35° C 59 to 95° F
Storage temperature
-30 to 70° C -22 to 158° F
Relative humidity 35 - 75 %, non-condensing
FIG 6-7
6-7 S CLASS 2 ENVIRONMENTAL SPECIFICATIONS
IMPORTANT HINT:
The use of dimensionally stable media is an essential pre-
requisite to obtain
high cut quality. Additionally, media expansion or
contraction may occur as a result of temperature variations. To improve the
dimensional stability of media, let it stabilize to the current environmental
conditions before use, for a minimum period of 24 hours.
6.2.9 Electrical
Frequency range: 47-63 Hz, single phase.
Voltage Range: 90 – 260 V.
Fuse Rate: T2.0A, 250V SCHURTER SPT OR EQUIVALENT.
WARNING: For continued protection against risk of fire, replace only with the
same type and rating of fuse: T2.0A, 250V SCHURTER SPT OR EQUIVALENT.