Need help?Do you have a question about the Summa D120 and is the answer not in the manual?
Procedures for safely removing the cutter from its packaging.
Instructions for assembling the cutter stand, mounting the machine, and placing it without a stand.
Identification of front and rear components of the SummaCut cutter.
Safety precautions, operating environment, and symbol explanations for safe use.
Guidelines for power connection, grounding, and computer connectivity (USB, Ethernet, RS-232).
Procedures for loading roll media, including pinch roller and flange setup.
Steps for installing and adjusting cutting tools like knives and pens.
Overview of the cutter's control panel, buttons, and LCD display functions.
How to set tool type, pressure, and drag knife offset for optimal cutting.
Adjusting the cutting velocity parameter to optimize speed and cut quality.
Managing and switching between 4 pre-defined user profiles for different jobs.
Calibrating the cutter's length accuracy for precise cutting of media.
Explanation of the Optical POSitioning System for contour cutting.
General steps for contour cutting using OPOS, including graphic creation and registration.
Steps for calibrating the OPOS sensor and media for accurate mark recognition.
Printing graphics with marks, loading, and registering marks for contour cutting.
Using OPOS for automated tasks like multiple copies and unattended cutting.
Functionality for cutting through media with special parameters and tips.
Overview of the cutter's main menu and its submenus.
Accessing and navigating the system setup options for configuration and tests.
Adjusting velocity, overcut, OptiCut, TurboCut, and panel settings.
Performing media, OPOS, and XY length calibrations for accuracy.
Accessing settings for IP config, language, units, firmware, and user copies.
Methods for cleaning the drive sleeves to maintain traction and performance.
How to clean the media sensor and Y-guide rail for optimal operation.
Procedure for safely replacing the fuse in the power entry module.
Overview of SummaCut models, hardware, interface, and general functionality.
List of compatible software and connection methods for the cutter.
Detailed machine dimensions, shipping dimensions, and media specifications.
Key performance data including speed, accuracy, resolution, and repeatability.
Details on communication interfaces, firmware versions, and supported character sets.
Operating conditions, electrical requirements, and fuse specifications.
Compliance information with safety and regulatory standards.
Part numbers and descriptions for cutter accessories and consumables.
General| Cutting Width | 1200 mm |
|---|---|
| Connectivity | USB, Ethernet |
| Power Requirements | 100-240 V AC, 50-60 Hz |
| Max Speed | 1130 mm/s diagonal |
| Cutting Force | 0-400 grams |
| Axial Acceleration | 3 G |
| Media Thickness | Up to 0.25 mm (10 mils) |
| Resolution | 0.025 mm |
| Operating System Compatibility | Windows |
| Repeatability | +/- 0.1 mm |
To Next Page