Summa D120 - Combined Contour Cut and Cutting through

SummaCut cutter User’s Manual
Contour Cutting 3-17
The menu can scroll through on or off, panel size, recut and sorting.
15.
Press or to change the panel size.
The value will change on the LCD.
16.
Press to confirm.
An asterisk will appear before the value, indicating it is now the selected setting.
ATTENTION: Recommended settings are: Panels : ON; Panel size : 3-10 cm;
recut : OFF sorting: ON.
17.
Press twice.
FIG 3-4
3-4 COMBINED CONTOUR CUT AND CUTTING THROUGH