Summa D120 - User Configuration Management

SummaCut cutter User’s Manual
Basic Operation 2-7
How to Change the User (Quick Parameter Change)
2.4
The SummaCut cutters include 4 user configurations, all of which consist of the same
parameters. Each configuration can have unique parameter settings. This allows the
cutter to be quickly and easily reconfigured for different types of jobs or media.
NOTE: Factory default values for the different users are all set the
same.
Changing the User Configuration:
1.
Power on the cutter.
2.
Press .
‘’Knife pressure’ will appear on the LCD.
3.
Use or to scroll through the menu until ‘User’ is reached. Press .
The current selected user will appear on the LCD.
4.
Press or to change the user.
The value will change on screen, the asterisk will disappear.
5.
Press to confirm.
An asterisk will appear before the user, indicating it is now the selected one.
6.
Press twice to leave the menu.