SummaCut cutter User’s Manual
Setup 1-9
Safety, Ideal Operating Environment, Connecting to the
1.3
The purpose of the user’s manual is not only to explain the operating procedures of
this machine, but it also provides the owner, users and operators with precaution
procedures for safe and proper machine operation for its intended purpose.
All information in this manual must be read and understood before any attempt is made
to operate the machine.
The manufacturer has no direct control over the machine operation and application.
Proper safety practice is the sole responsibility of the owner, user and operator.
All instructions and safety warnings in this manual are based upon the use of this
machine under proper operating conditions without alterations from the original design.
Any use of the cutter that is beyond the capabilities of the combination knife/material is
considered as improper use and may result in injury and serious damage to the
machine and will lead to loss of warranty.
Symbols used in the manual
Warning with dark (red) symbol: Refers to immediate threat
that can cause serious injurie
s and effects on health and
safety.
Warning
with light (yellow) symbol: Refers to a dangerous
situation that can cause injuries and serious damage to the
machine.
Attention with dark (red) symbol: Refers to useful information
to prevent damage to the
equipment and prolong the service
live of the machine.
Attention with light (yellow) symbol: Refers to useful tips to
enhance the user-friendliness and make the work significantly
easier.
Note: Can be considered as a general tip;
useful to know.
To Next Page
Loading...
