Summa D120 - Detailed OPOS Workflow

SummaCut cutter User’s Manual
Contour Cutting 3-5
Detailed OPOS Operation
3.3
3.3.1
Printing the graphic
1.
Print the graphic and its marks with a printer (scale = 100%). When printing on a roll,
make sure that the graphic’s Origin mark coincides with the media’s origin (1).
2.
Make sure there is at least one cm (0.4in) margin on each side of the graphic (2). A
2 cm (0.8in) margin is preferable. There must also be a front margin of 1 cm (3).
3.
Leave a margin of at least 4 cm (1.6in), following the print when using sheets or
when cutting the print from a roll (4).
1
2
3
4