Summa D120 - Page 17

SummaCut cutter User’s Manual
Setup 1-8
6.
USB port:
This interface is based on the standards specified in Universal Serial Bus
Specifications Revision 1.1. It allows a high-speed bi-directional communication
between the host computer and the cutter.
7.
Second communication port can be serial port or Ethernet dependent on the
model: Serial DB-9P:
This provides serial bi-directional communication between the
cutter and a host computer.
Ethernet port RJ45:
For connecting the cutter to the LAN.
8.
Roll media guide bushes:
The two flange guides serve to keep the media roll in
place when media is pulled from the roll.
9.
Casters:
The casters on the stand are equipped with locking brakes. Once the
cutter has been moved to its new location, press the brakes with your foot to lock
the casters.
10.
Media basket:
The stand and linen media basket come as standard equipment with
all 120, 140 and 160 SummaCut cutters (except model D140
FX
).
11.
Media support rollers:
Rotating support rollers for the media roll.