Need help?Do you have a question about the Summa SUMMACUT and is the answer not in the manual?
Instructions for removing the cutter and its accessories from the packaging.
Identifies and describes the main parts of the SummaCut cutter, front and rear views.
Details on grounding the cutter and connecting it to the mains power supply.
Guides on establishing USB and RS-232 connections between the cutter and a computer.
Step-by-step instructions for loading various types of media, including pinch roller positioning.
Instructions for installing and setting up cutting tools like knives and pens.
Explains the function of the LCD display and control panel buttons for cutter operation.
How to adjust parameters like tool type, pressure, and knife offset for optimal cutting.
Guides on setting cutter velocity and acceleration parameters for different cutting tasks.
Instructions on switching between four user profiles for quick parameter changes.
Procedure to calibrate the cutter for accurate media feeding and length measurement.
Explains the OPOS system's role in contour cutting and its basic operation.
Details on performing OPOS calibration and media calibration for accurate marker sensing.
Covers creating graphics with markers, setting OPOS parameters, and cutting contours.
How to use OPOS for automated cutting of multiple copies or on multiple sheets.
Instructions for setting up and using the FlexCut feature for cutting entirely through media.
Overview of parameters and tests accessible via the control panel.
Explains the structure and access to the cutter's main operational menus.
Details configuration parameters and internal tests available in the system setup.
General advice on keeping the cutter clean and performing routine maintenance.
Procedure for cleaning the drive sleeves to ensure proper media traction.
How to clean the media sensor to prevent malfunctions.
Instructions for cleaning the sliding surfaces of the Y-guide rail and tool carriage rollers.
Step-by-step guide on how to safely replace the fuse in the power entry module.
Lists available SummaCut models and their configurations.
Details the cutter's hardware components and interface options.
Provides detailed technical data including dimensions, media handling, performance, and interface.
Lists available accessories, consumables, and their part numbers.
General| Contour Cutting | Yes |
|---|---|
| Connectivity | USB, Ethernet |
| OPOS (Optical Positioning System) | Yes |
| Cutting Technology | Tangential knife |
| Resolution | 0.025 mm |
| Interface | USB, Ethernet |
| Power Requirements | 100-240 V, 50/60 Hz |
To Next Page