Summa SUMMACUT - Changing User Configurations

SummaCut cutter User’s Manual
Basic Operation 2-8
2.4 How to Change the User (Quick Parameter Change)
The SummaCut cutters include 4 user configurations, all of which consist of the same
parameters. Each configuration can have unique parameter settings. This allows the cutter
to be quickly and easily reconfigured for different types of jobs or media.
NOTE: Factory default values for the different users are all set the same.
Changing the User Configuration:
1. Power on the cutter.
2. Press
.
‘Velocity’ will appear on the LCD.
3. Use
or to scroll through the menu until ‘User Config’ is reached, then
press
.
‘User Config’ will appear on the LCD.
4. Press
.
The current selected user will appear on the LCD.
5. Press
or to change the user.
The value will change on screen, the asterisk will disappear.
6. Press
to confirm.
An asterisk will appear before the user, indicating it is now the selected one.
7. Press
twice to leave the menu.