S CLASS™ cutter User’s Manual
Detailed Operation 4-18
4.3.3 User
The S CLASS™ cutters include 8 user configurations, all of which consist of the same
parameters. Each configuration can have unique parameter settings. This allows the cutter
to be quickly and easily reconfigured for different types of jobs or media. Apart from the
parameters mentioned in section 4.3.1, the X/Y calibration is also user-dependent.
(information is contained within each of the eight individual user settings).
Press , then use or to change the user.
Press to confirm or to cancel.
The names of the users can only be changed via the computer.
NOTE: Summa Cutter Control for PC can be used to change the name directly
Mac users with OSX can use a small program that is on the CD to send files to the cutter.
There is a file in the root of the CD called username.dmp.
This file can be used to change the user name. To change user name, follow this next
procedure:
1. Open file with a simple text editor.
2. Change text ‘change_name’ to the desired user name.
3. Use underscore (_) instead of spaces. The length of the new name should be 16
characters or less.
4. Save this file.
5. Send to the cutter.
CAUTION: Misuse of this file can seriously damage the internal cutter parameters.
To Next Page
Loading...
