S CLASS™ cutter User’s Manual
Specifications 6-7
6.2.8 Environmental
(Cutter without media)
Operating Temperature
15 to 35° C 59 to 95° F
Storage temperature
-30 to 70° C -22 to 158° F
Relative humidity
35 - 75 %, non-condensing
TABLE 6-7
6-7 S CLASS™ ENVIRONMENTAL SPECIFICATIONS
IMPORTANT HINT: The use of dimensionally stable media is an essential pre-requisite
to obtaining high cut quality. Additionally, media expansion or contraction may occur as
a result of temperature variations. To improve the dimensional stability of media, let it
stabilize to the current environmental conditions before use, for a minimum period of
24 hours.
6.2.9 Electrical
Frequency range: 47-63 Hz, single phase.
Voltage Range: 90 – 260 V.
Fuse Rate: T2.0A, 250V SCHURTER SPT OR EQUIVALENT.
CAUTION: For continued protection against risk of fire, replace only with the same type and
rating of fuse.
To Next Page
Loading...
