Summa S CLASS - Changing Tool Pressure; Changing User

S CLASS™ cutter User’s Manual
Basic Operation 2-17
2.6.3 Changing tool pressure
Press area 3
The pressure menu will appear on screen, the current pressure is highlighted.
1. Use or to change the pressure.
The new value (highlighted) will change.
2. Press to perform the internal tool pressure test (see 1.6.1.1).
3. Press to confirm and leave the tool pressure menu.
4. Press to leave the pressure unchanged.
2.6.4 Changing user
Press area 4
The different users will appear on screen.
1. Use or to change user.
2. Press to confirm the new user.
3. Press to leave the menu without changing the user.