Need help?Do you have a question about the Summa S3 Series and is the answer not in the manual?
General safety instructions and precautions for machine operation.
Specific safety measures and warnings regarding usage and potential hazards.
Guidelines for preventing electrical shock, including grounding and voltage.
Procedures for connecting the cutter to a computer using a USB cable.
Instructions for connecting the cutter to a network via Ethernet cable.
How to correctly position the pinch rollers for media loading and tracking.
Procedure for adjusting the pressure applied by the outer pinch rollers.
Step-by-step guide to installing and setting up the drag knife.
Instructions for installing a pen into the cutter for plotting.
Guide for installing the tangential knife and setting its depth.
Procedures for installing creasing tools or extra pens in the performance head.
Overview of the touchscreen interface for cutter control and status display.
Explains touchscreen buttons, current settings, and job control icons.
Guide to selecting and configuring the installed tool (knife, pen, creasing).
Procedure for adjusting the pressure for different tools and media.
How to set the drag knife offset for precise cutting accuracy.
Steps for calibrating the tangential knife to ensure concentricity and accuracy.
How to correct calibration errors like origin, lateral, and longitudinal deviation.
Steps to set up and use the FlexCut feature for cutting through media.
Detailed explanation of parameters for FlexCut and how to determine them.
General workflow for performing contour cutting using OPOS.
Calibrating the distance between the OPOS sensor and the knife tip.
Media calibration to ensure OPOS can recognize registration marks accurately.
Explanation of the FlexCut feature for cutting through media.
Calibrating media for OPOS to recognize registration marks accurately.
Calibrating the distance between the OPOS sensor and the knife tip.
Adjusting media sensors for accurate detection of different media types.
Procedure for calibrating media length for accurate sign dimensions.
Instructions for cleaning the cutter's drive system and grit rollers.
How to clean the media sensors to prevent malfunctions.
Technical performance specifications including speed, resolution, and accuracy.
To Next Page
General