Summa S3 Series - Operating Environment

S Class 3 User’s Manual
Setup 1-5
Environmental conditions can significantly affect the machine’s performance.
The environmental conditions of the machine (without media) are as follows:
Operating Temperature
15 to 35 C
59 to 95 F
Storage temperature
-30 to 70 C
-22 to 158 F
Relative humidity
35 - 75 %, non-condensing
35 - 75 %, non-condensing
The environmental conditions of the used media may be stricter than those of the machine itself.
Please refer to the documentation about the used media.
Moreover, make sure that the media has had enough time to acclimatize.
NOTE: Keep the cutter away from direct sunlight or a strong indoor light source.
The optical sensors in the machine may be affected, thus causing unexpected
behaviour of the cutter.
1.1.6 Operating environment