Summa S3 Series - Models (Head Types); D Models; T Models; S Class 3 Toolhead for Drag Knife

S Class 3 User’s Manual
Setup 1-9
There are 3 different models available within the range of the S series. They can be identified by the
type of tool head.
The D models are equipped with a head for drag knives. The drag knife can be replaced by a pen.
FIG 1-4
1-4 S CLASS 3 TOOLHEAD FOR DRAG KNIFE
1.2.3.2 T models
The T models are equipped with a head for tangential knives. The tangential knife can be replaced by
a drag knife or a pen.
FIG 1-5
1-5 S CLASS 3 TOOLHEAD FOR TANGENTIAL KNIFE
1.2.3 Models (head types)
1.2.3.1 D models