S Class 3 User’s Manual
Setup 1-4
Warning label regarding the fuse. For continued
protection against risk of fire, replace only with fuse of
the same type and having the same electrical rating:
T2AH 250V.
Double pole/neutral fusing.
This label is located near the power inlet, on the rear.
Caution: Always leave the pinch rollers in the upper
position when the cutter is not in use.
This label is located on the right side plate.
The S Class 3 cutters use razor-sharp knives. Touching
the knife with bare hands may cause injury.
Hazardous moving part. Keep your fingers and other
body parts away from this area.
This label is located on the cutting head.
1.1.5 Warning labels on the machine
To Next Page
Loading...
