Summa S One Series - Cutting the same Graphic on Multiple Media Sheets

S One User’s Manual
OPOS 3-10
If the same graphic design needs to be printed on multiple sheets, this feature can be used.
NOTE: The sheets should have more or less the same size, and the graphics on
them should be oriented and positioned the same way.
NOTE: OPOS sheet mode ignores the parameter OPOS origin, so the tool will
always have to bet set manually for the first job.
First, load the media and check whether the parameters of the OPOS marks are set correctly.
Cutting the same graphic on multiple media sheets:
1. Press Settings.
2. Scroll down with the arrow
and press Configuration.
3. Press OPOS parameters.
4. Press OPOS panelling.
5. Select 2 or 4 marks.
6. Press to confirm.
7. Press to get online
again.
S1D160
50000 x 145 mm
Knife
700 mm/s
90 g
Configuration 1
LAN 192.168.10.2
FlexCut
Tool
Actions
Settings
Calibrations
Configuration
Ethernet
Wi-Fi
USB Port
Language
Menu units
OPOS Parameters
Configuration
OPOS origin
OPOS panelling
OPOS sheet mode
OPOS parameters
Off
OPOS sheet mode
Off
OPOS sheet mode
Ethernet
Wi-Fi
USB Port
Language
Menu units
OPOS Parameters
Configuration
Tool
3.3.3 Cutting the same graphic on multiple media sheets