- 30 -
1. Sunba Illuminati has waterproof ethernet kit shipped together with
the camera. To apply the waterproof kit, you have to cut the crystal
head, thread the ethernet cable through the waterproof kit, and then
finally use crimper tool to add the crystal head back to the cable.
2.Using electricial waterproof tape is one of the most popular ways of
protecting connectors for water exposure.
3.Using waterproof connector protector together with some electrical
waterproof tapes can be another option.
13. ONVIF Integration
To integrate to ONVIF Network Video Recorder/VMS software such as
Synology, QNAP, Milestone, Blue Iris or Onvif Device Manager, it is
required to enable the ONVIF protocol first on the camera and assign a
unique set of username/password specifically for the ONVIF protocol.
The ONVIF configuration can be modified in
Configuration-Network-Advanced Settings-Integration Protocol. By default,
the ONVIF protocol is enabled with the same default username/password as
the camera’s private protocol (admin/Admin12345).
If ONVIF is disabled, the camera will not be discoverable by any other ONVIF
device/software including Blue Iris and ONVIF Device Mnager.
The ONVIF username and password can also be modified and separate from
the camera’s main username/password.
To Next Page
Loading...
