42 SUNFAR E300 SERIES
Data Operation
0 Read slave state and characteristics information
1 Read slave running parameter
2 Read function code parameter
Modify inverter RAM area function code parameter, it will not save if power-off
(no storage)
3
4 Send control order
5 Modify inverter EPROM area function code parameter, it will save if power-off
6～F
Reserved
（4）Operation order
Master gives control order to slave and it exists in all types of data frame (master sends 4th and
5th
）shown as bellow：
Data Operation Data Operation
00H Invalid order 10H Set slave running freq
01H FWD running startup 11H FWD running startup with running freq set
02H REV running startup 12H REV running startup with running freq set
03H Stop 13H Stop with running freq set
04H Slave FWD jog 14H FWD jog running with running freq set
05H Slave REV jog 15H REV jog running with running freq set
06H Jog running stop 16H Jog stop with running freq set
…
…
…
…
20H Slave failure reset 30H Reserved
21H Slave urgent stop 31H Reserved
E300 Series Mini-type Integrated Universal Inverter Manual
To Next Page
Loading...
