Problem with Motor Soluon
Not Respond to Remote
(First, verify that electric
power is good and
passes Self Test as
or
while holding down the
the Remote
or
Unplug Motor,
Plug in Motor,
If Motor jogs, go to GROUP A,
If Motor does not jog, go to GROUP B
GROUP A
Press and Hold the CLOSE and OPEN
Press and Hold the PROGRAMMING
GROUP B
Press and Hold the CLOSE and OPEN
Perform Steps 9 - 18 in Appendix B
If GROUP A or B (above) does not x the problem, then . . .
Perform Steps 1 - 18 in Appendix B
800-670-7071
How to Self Test the
CLOSE, OPEN, my
CR2430
TROUBLESHOOTING - Addional Motor Troubleshoong
To Next Page
Loading...
Need help?
General
