SunStar KM-2070P SERIES - Sewing Method of Left;Right Blind

4) Sewing Method of Left/Right Blind
■ Indication Status of Operation Panel
Ex) 5 Stitch Setting of Left Blind
■ Operation Order
1. Press left blind key.
·Left blind indication lamp turns on and pattern number and
stitch number for left blind are displayed on the indication
device at the same time and after a moment, zigzag-width
is indicated.
2. Press PARA/SET key to change stitch number of left
blind.
·Display of zigzag-width on indication device blinks. At
this time, pressing pattern key of left blind, pattern
number and stitch number are displayed.
3. Change the number of stitches by using + and
–key. (Ex: 5 stitches)
Stitch scope of blind : 0~99 Stitch
4. Press PARA/SET key when the change is completed.
·Width is displayed on the indication device.
5. You may start sewing by stepping on the pedal.
Power On Status
Sewing
or
Indication Device
Pattern Number
Stitch Number
Stitch
Number :5
<Example of 5 stitch left blind pattern>
1 period of left blind
pattern
11
R